10 Inch Circular Saw Cutting Depth

To sum up a standard circular saw can offer a cutting depth of 2 5 inches as the maximum but you can adjust the depth to match your requirements.

10 inch circular saw cutting depth. Your guide to make the cut a standard miter saw is typically a circular saw installed firmly on a hinged frame so users can make precise vertical cuts repetitively either on angle or straight in lumber or small boards. In this circular saw 101 video this old house contributor mark clement demonstrates how to adjust the depth of the blade on your circular saw to maximize its potential. However sometimes you need a bit more depth of cut and 7 25 inch is needed.

The powerful 15 amp 5 200 rpm motor delivers maximum power for high performance cutting without bogging down under load. Corded circular saw with electric brake and 24t carbide blade 436 63 436 63. Includes 1 10 1 4 in.

Most saws with blade capacities of 6 inches or more can cut through 2 inch dimensional lumber at a 45 degree angle in a single pass. Circular saw 1 heavy duty steel case 1 10 1 4 in. Of material in one swath.

In comparison to the 7 blade the 10 has a maximum depth of 3 13 16 while the 12 blade can cut to 4. A saw with a 10 inch blade makes right angle cuts across a board 5 1 2 inches wide sufficient for two by six lumber. The most common blade diameter is 7 1 4 inches.

A 10 inch saw can cut lumber or plywood up to 1 25 inch thick without causing disturbance to users. There are problems with fitting a larger blade to a normal saw as it has not been designed for such. Learn how to safely operate the tool avoid excess friction and create a cleaner cut by correctly setting the saw and adjusting the blade s depth.

This shows that the 10 blade will still not be sufficient for your needs while the 12 will only just barely make it. The larger the blade the deeper the cut. For comparison i have included the depth of cut specifications for the 7 25 inch version of this saw.