Proform Joint Compound Drying Time

76 2 mm on each side and feathered out at the edges.

Proform joint compound drying time. Drying times joint compound should generally be allowed to dry for 24 hours between coats and before sanding painting or priming. How long it takes for joint compound to dry properly installing drywall requires not just effort but also plenty of time particularly when it comes to drying time for each coat of drywall mud. This drying compound hardens through evaporation which means waiting up to 24 hours between coats.

Proform brand all purpose joint compound is a vinyl base ready mix joint compound for the professional that may be used directly from the container. Then use it full strength or slightly thinned for the top layers. Good green shaded areas are environmental conditions that provide best drying.

Fair yellow shaded areas are environmental conditions considered to be reasonable drying conditions. Try to avoid ridges and bumps with all purpose joint compound. High humidity levels and warm temperatures both increase drying.

Tips on having drywall compound dry faster. Basic uses all purpose joint compound is designed for tape application fastener spotting and complete joint finishing of gypsum board. See joint compound drying time guide next page proform fiberglass mesh tape treatment with setting type joint compounds center fiberglass mesh tape over the joint and press tape irmly to ensure proper bond.

Once the compound is thoroughly dry approximately 24 hours cover the joint tape with a coat of all purpose joint compound or topping compound spread approximately 3 in. Apply it full strength across the joints and at corners for bedding the tape. After this coat is thoroughly dry apply another coat of all purpose joint compound or topping.

However longer drying times up to 48 hours between coats are possible depending on temperature and humidity levels. Cut with drywall knife. Joint compound drying time varies.